Splasm Software Discussions https://splasm.com/forum/ |
|
Version 1.1.4 Quality Problem https://splasm.com/forum/viewtopic.php?f=13&t=2435 |
Page 1 of 1 |
Author: | flomet [ Wed Jan 06, 2010 10:28 am ] |
Post subject: | Version 1.1.4 Quality Problem |
I have upgraded to the latest version of Audiobook and imported a cd at 128Kbps with a sample rate of 32kHz, this I do with all my imports then when I come to finish the audiobook I lower the quality to 64Kbps with a sample rate of 32kHz if there is no musical content. The problem with this latest update is that after setting the lower quality and finishing the audiobook I find that the quality has not been lowered to my setting and is still 128Kbps. This did not happen with the v1.1.3. Regards Jim K |
Author: | Randy K. [ Wed Jan 06, 2010 12:31 pm ] |
Post subject: | Re: Version 1.1.4 Quality Problem |
Jim, There was some issues with pass through not working correctly in some cases in 1.1.3, which has since been corrected. Now that Audiobook Builder can pass through your audio, it retains your cd quality without re-encoding. You will want to make sure you have pass through turned off in your build options if you want to re-encode in the lower quality. Let us know if this helps with your issue. |
Author: | flomet [ Wed Jan 06, 2010 12:35 pm ] |
Post subject: | Re: Version 1.1.4 Quality Problem |
Thanks for a quick reply, I must remember to untick the pass through box when required. Regards Jim K |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |